Scrap kit is a PTU by A Tagger Scrap  called Sophia
Tube is a Jose Cano Tube - Sophia
Kit is An Exclusive at  Scraps and the City

New transparent raster layer 800x800
You can resize this later if needed

open frame 3 copy and paste as new layer
resize down by 80% about 1 time
Place in the center

Open paper 13 copy and paste as new layer
Move below the frame layer and erase all parts on the outside of the frame

open the tube and grab the close up layer
Move below the frame layer
Resize down by 80% about 3 time
Erase all parts on the outside of the frame
Add a Xero  porcelin with the following settings
add a luminnace legacy 

open the full length tube layer
copy and paste as new layer
Move above the frame layer
resize down 3 times by 80%
duplicate the frame layer and move above the full length tube layer
carefully erase the frame covering the Top and the arms of the tube

open the sparkles copy and paste as new layer
Move below the full length tube layer
erase all parts on the outside.

open ribbon 4 copy and paste as new layer
Move above all other layers  to the bottom
Carefully erase the ribbon covering her fingers and hand
repeat with Ribbon 3 ( this one is on the black ribbon

open bow 1 copy and paste as new layer
resize down 1 time by 80% and move above ribbon 3
carefully erase parts covering the tube( I used the smalled eraser possible)

open the white fan copy and paste as new layer
Move to the bottom left
free rotate to the right by 13%

Open the kittyshoe copy and paste as new layer
Move to the bottom left above the fan

open the gift copy and paste as new layer
Move to the left below the kittyshoe

open bottle 1 copy and paste as new layer
resize down by 80% 1 time and move to the right
above all other layers

open the watch copy and paste as new layer
mirror, resize down by 80% about 1 time and move to the right
below the bottle

open the key copy and paste as new layer
place above the bottle and to the right
I have it to where it looks like it is tied on the bottle

open the tulle copy and paste as new layer
Resize down 1 time by 80% and move to the right
below the watch layer

open the umbrella copy and paste as new layer
resize down 1 time by 80% and move to the left above the kittyshoe

add your name copyright and save

SHOP... LOTS OF SALES AND GOODIES 

http://thescrappersden.com/store/

PTU Scrapkit  Bad Girl Tinker by Naughty Angel

An exclusive kit only at SPU - Sweet PinupShop
Artwork of Fumiko Barrows  from Dreamscape Imaging

New transparent raster layer 800x80
You can resize down later if needed..

Open frame 2 copy and paste as new layer
move to the bottom center

open paper 5 copy and paste as new layer
Move below the frame layer
erase all parts on the outside of the frame

Open your tube copy and paste as new layer
Move below frame layer , erase all excess below frame
add a luminance legacy
Duplicate frame layer
Copy and paste tube again and move below the duplicated frame
Erase the parts of the frame covering the tube

open element 38 copy and paste as new layer
resize down 1 time by 80%
Move above all other layers to the left

Open element 33 copy and paste as new layer
resize down 2 times by 80%  Move to the bottom above all other layers
Move below element 38

open element 34 copy and paste as new layer
Flip and move to the bottom  Below element 38

open element 27 copy and paste as new layer
move below all elements to the right
and to the right alittle

Open element41 copy and paste as new layer
resize down by 80% about 1 time
Free rotate to the right by 90% and move below the Handcuffs

open element42 copy and paste as new layer
resize down by 80% about 2 times
Move to the left below element38

Open element 37 copy and paste as new layer
resize down by 80% about 3 times
Move above all other layers and to the bottom left

add name copy right and save

PTU Scrapkit is  Mad Emo Love - Denise Creations  you can purchase at  Low budget Scrapping
Artwork of Misticheskaya - Pics for Design

New  Transparent Raster Layer 800x800, you can resize this later if needed.

Open frame 52 copy and paste as new layer
free rotate to the left by 28% , place in the center

Open paper 12 copy and paste as new layer
move below the frame layer and erase all parts on the outside of the frame

Open the tube copy and paste as new layer
Place below the frame and erase all parts
Add a luminance legacy to the tube

Open the tube again
Resize down by 80% about 2 times
Mirror and move to the right
Duplicate the frame layer
and move above the tube layer
erase all parts of the leg on the outside of the frame
Now carefully erase the parts of the  frame covering the tube

Open element 34 copy and paste as new layer
place in the center below all other layers

open element 35 copy and paste as new layer
resize down by 80% about  1 time
Move below the Origional frame layer and erase
all parts on the outside of the frame

open element 47 copy and paste as new layer
resize down by 80% about 3 times
Mirror and move to the left

open element 43 copy and paste as new layer
resize down by 80% about 4 times
Move below the bear and to the left

Open element 12 copy and paste as new layer
resize down by 80% about 2 times
Move to the right of the bear

Open element 4 copy and paste as new layer
resize down by 80% about 3 times Move to the center
below the bear and shoe

open element 24 copy and paste as new layer
resize down by 80% about 3 times
Move to the right below the shoe

open element 22 copy and paste as new layer
resize down 1 time by 80% and move to the lieft below the bear.

Add name copyright and save

PTU Scrap Kit Antique Rose by A Taggers Scrap
Artwork of Alex Prihodko - Pics for Design

New Transparent Raster Layer 700x700
You can cut out any excess later if you wish too

Open frame 6 copy and paste as new layer
Resize down 1 time by 80% and free rotate to the left by 90%

Open your tube copy and paste as new layer
reszie down by 80% about 3 times
Duplicate and hide the duplicated layer
Move the origional tube layer below the frame and erase all parts on the outside of the frame
add a luminance legacy

open paper 11 copy and paste as new layer
Move below all other layers
Erase all parts on the outside of the frame

unhide the duplicated tube layer and mirror
Move to the left a little more and above all other layers

Open bow2 copy and paste as new layer
Resize down by 80% about 1 times
Move above the frame layer

open the clock, copy and paste as new layer
resize down 2 time by 80% and move to the right
below the tube layer

open the books copy and paste as new layer
Move below the tube layer above the clock layer to the right center

open the buckets copy and paste as new layer
resize down by 80% about 3 Times
Move to the right below the books and clock layers

open leaves 2 copy and paste as new layer
Resize down by 80% about 1 times
Move below the clock layer
Move to the right alittle

add your name copyright and save

PTU Scrap Kit is Rawk On By Freeks Creation, 

You can find this kit at The Scrappers Den

Artwork of  Arthur Crowe . 

Do not use with out a license and permission to do so

New Transparent Raster Layer 700x700

Open element 39 copy and paste as new layer
Open the tube copy and paste as new layer
Resize down 1 time by 80% move to the left above all other layers

Open paper 7 copy and paste as new layer
Resize down 1 time by 80%
Move above all other layers
Erase all parts on the outside of the frame

Open element 30 copy and paste as new layer
move below the tube layer and to the bottom

open element 1 copy and paste as new layer
resize down by 80% about 3 times
Move to the right below the tube layer

open element 4 copy and paste as new layer
Move to the right below the star layer

open element 10 copy and paste as new layer
resize down by 80% about 4 times
Free rotate to the right by 35 %
Move below the star layer and to the right

open element 27 copy and paste as new layer
resize down by 80% about 3 times
Move to the left below the frame layer

open element 25 copy and paste as new layer
resize down by 80% about 4 times
Move below element 27 and to the left

add your name copy right and save

PTU Scrapkit is Blue Lace by Devilish Dezines, It is an Exclusive @ SATC

Artwork is by Barbara Jensen

New transparent raster layer 700x700

Open frame 7 copy and paste as new layer
resize down by 80% about 3 times

Open paper 5 copy and paste as new layer
resize down by 80% about 2 times
Move below frame layer
erase all parts on the outside of the frame

Open tube copy and paste as new layer
Move above paper layer
Erase all parts on the outside of the frame
Add a Luminance legacy

Open tube again copy and paste as new layer
Resize down 1 time by 80%
Move above all other layers
Duplicate frame layer and move above all other layers
erase all parts of the frame on the outside of the tube layer

Open element 79 copy and paste as new layer
Resize down by 80% about 2 times
Free Rotate to the left by 90% Move to the bottom above all other layers

Open element 31 copy and paste as new layer
resize down by 80% about 4 times
Free rotate by 45% to the left Move to the left below the ribbon layer

Open element 5 copy and paste as new layer
resize down by 80% about 4 times
Move to the bottom left below  element 31

open element 81 copy and paste as new layer
resize down by 80% by about 7 times
Move to the bottom right above all other layers

open element 117 copy and paste as new layer
Resize down by 80% about 6 times
Move to the bottom left above the clock layer

open element 99 copy and paste as new layer
resize down by 80% about 6 times
Free rotate to the right by 35%
move Bottom right below the flower layer

Add name copyright and save

PTU Scrap Kit by Bibi's Collection -  Sexy Little Devil - Scraps and the City
Artwork of  Akkasshaa. You can purchase her work through Scraps and the City

New transparent raster layer 700x700. We can resize later if needed
open element 10 copy and paste as new layer
resize down by 80% about 4 times place in the center

Open paper 10 copy and paste as new layer
resize down by 80% about 3 times
Move below the frame layer
Erase all parts on the outside of the frame layer

Open the tube copy and paste as new layer
Move between the paper and frame layer
place as desired and erase all parts on the outside of the frame
add a luminance legacy to the tube layer

Copy and paste the tube once again
resize down by 80% about 2 times
Mirror and move to the right above all other layers

open element 7 copy and paste as new layer
resize down by 80% about 2 times
move below the frame layer
erase all parts on the outside of the frame

open element 8 copy and paste as new layer
resize down by 80% about 3 times
Move below the full tube layer to the right

open element 9 copy and paste as new layer
resize down by 80% about 3 times and move to the left
below the full tube layer 

Open element 99 copy and paste as new layer
resize down by 80% about 5 time
move to the right above the book layer

open element 61 copy and paste as new layer
Resize down by 80% about 1 time Mirror and move to the left
below the books

open element 63 copy and paste as new layer
resize down by 80% about 1 times
Move below the full length tube layer

Open element 20 copy and paste as new layer
Move to the bottom above element 63

Add name copyright and save

PTU Scrap kit is Rawk on by Darlin's Creations

You can purchase her kits at The Scrappers Den
Artwork of Zlata_M, You can purchase through Pics for Design

New transparent Raster layer 750x750 . We can resize later if needed.
Open element 39 copy and paste as new layer Move near the bottom of
the layer

Open your tube copy and paste as new layer
This should be on top of the Frame layer
Carefully Place with the legs at the bottom of the frame

open paper 3 copy and paste as new layer
Move below all other layers
Erase what is on the outside of the frame

open element 22 copy and paste as new layer
resize down about 3 times by 80% and move above all other layers
to the bottom of the frame

Open element 32 copy and paste as new layer
Move below all other layers directly in the center

open element 24 copy and paste as new layer
resize down by 80% about 6 times
Mirror and move to the left above all other layers

open element 28 copy and paste as new layer
resize down by 80% about 3 times, Mirror and move to the left
above element 28

open element 2 copy and paste as new layer
resize down by 80% about 5 times and free rotate to the right by 35
Move to the right above all other layers

Open element 19 copy and paste as new layer
resize down by 80% about 5 times
Move to the right above all other layers

add your name copyright and save

PTU Kit - Twilight Nights   by Lins Creations
You can purchase her kits at Scrappin Naturally  
Artwork of Ismael Rac, you can purchase at his store here

New transparent raster layer 700x700, You ca resize later if needed.

Open frame 20 copy and paste as new layer
resize down by 80% about 7 times, Place in the center

Open paper 18 copy and paste as new layer
Move below the frame layer, resize down by 80% about 4 times
Erase all parts on the outside of the frame layer

Open the Bella Tube copy and paste as new layer
resize down 1 time by 80% Move below the frame layer
erase all parts on the outside of the frame
add a luminance legacy

open element 59 copy and paste as new layer
copy and paste as new layer
resize down by 80% about  8 times
Move above the frame layer and to the bottom

open element 44 copy and paste as new layer
resize down by 80% about 6 times
Move below the ribbon layer and to the left

open the edward tube copy and paste as new layer
resize down 1 time by 80%
Mirror and move to the left
above all other layers

open element 8 copy and paste as new layer
resize down by 80% about  6 times move to the right

open element 61 copy and paste as new layer
resize down by 80% about 7 times
Move directly above the frame layer and erase the part below  on the back
side of the wolf

open element 15 copy and paste as new layer
resize down to desired
Move above all other layers and to the right of the books

open element 51 copy and paste as new layer
resize down by 80% about 6 times
Move to the right directly above the frame layer

open element 9 copy and paste as new layer
resize down by 80% about 5 times
move direcltly above the frame layer and erase
all parts on the outside of the elements

add your name copyright and save

Tube is by Malberri, from IndieZine
Kit is PTU Toxic Kitty by Alika Scraps

It is an Exclusive Kit for Pimp My Tags With Scraps

New Raster Layer 700x700

Open element45 copy and paste as new layer
Resize down by 80% about 3 times
Place in the center

Open paper 10 copy and paste as new layer
Move below the frame layer
erase all the parts on the outside of the frame

Open the tube copy and paste as new layer
Resize up by 120% move below the frame and erase all
excess add a luminance legacy

Open the tube again copy and paste as new layer
Resize down by 80% about 1 time
Mirrior and move to the right
Above all other layers

open as49 copy and paste as new layer
Move below all other layers

open as83 copy and paste as new layer
move below the frame layer and erase all excess

open as81 copy and paste as new layer
mirror and move the right side below the right foot
Placing near the bottom

open as26 copy and paste as new layer
resize down about 6 times by 80%
Mirror and move to the left

open as23 copy and paste as new layer
resize down by 80% about 3 times
move below as26 

open as53 copy and paste as new layer
resize down 2 times by 80% Move below
all the element layers 

open as10 copy and paste as new layer
resize down 1 time by 80% and free rotate to the
right by 30%

open as31 copy and paste as new layer
resize down by 80% about 2 times
Move to the right below the tube layer

open as43 copy and paste as new layer
resize down about 10 times by 80%
free rotate to the left by 30%

Open as29 copy and paste as new layer
Repeat the same steps as 43 but
free rotate to the right

Move both to the left below all other elements
See mine for exact placement Ideas

add your name copyright and save

*Written on 10/10/12 - by Sami aka Guilty Pleasures using my own mind and creativity!

Any similarities is completely coincidental and Accidental*

  PTU Scrap kit is  Vickie by Rissa Designs

Artwork is by  Alex Prihodko, you can purchase at Picsfordesign.

New Transparent raster layer 650x650. You can resize this later if needed.

Open frame 2 copy and paste as new layer
resize down 1 time by 80% and place in the center

open paper 3 copy and paste as new layer
Move below the frame layer and erase all parts on the outside of the frame

Open your tube copy and paste as new layer
Resize down about 4 times by 80% and move to the left
Open your tube again, copy and paste as new layer
Place as desired below the frame layer and erase all excess
add a luminance legacy

open splatter 2 copy and paste as new layer
Move to the right below all other layers

Open the razor copy and paste as new layer
resize down about 3 times by 80%
free rotate to the left by 32% and move to the right
below the full length tube layer

open the bottle copy and paste as new layer
resize down about 3 times by 80%
move above the razor layer and slightly to the left.

open the spider copy and paste as new layer
resize down by 80% about 6 times
Move below the tube layer and on top of the bottle

open the candle copy and paste as new layer
resize down by 80% about 3 times
Move to the right below tube layer

Adjust where your other elements are

add name copyright and save

Written on 3 October 2012 * Using my own mind and creativity and similarities are completely coinicdental*

Tube is by Barbara Jensen,  You can purchase her tubes at her store.

PTU Scrap Kit is Remember by Stormy Rein Scraps, 

Purchase at The Scrappers Den
Mask of choice

New Transparent Raster Layer 800x800

Open frame 3 copy and paste as new layer
Resize down  by 80% about 2 times
Move down slightly still leaving in the center

open paper 7 copy and paste as new layer
Move below all other layers
Go to layers , Load mask from image
Merge group and move down slightly to line up with the frame

Open your close up tube layer copy and paste as new layer
Move below the frame layer
Erase all parts on the tube on the outside of the frame
Add a luminance legacy

Open the Bling copy and paste as new layer
Resize down by 80% about  4 times 
Move to the bottom above all other layers

Open full legnth tube copy and paste as new layer
Move below the bling placing to where her leg is covered by
the bottom wire
add a Xero Porcelain with the following settings

Open ribbon3 copy and paste as new layer
Resize down about 3 times by 80%
Move below the bling layer

open ribbon copy and paste as new layer
resize down  by 80% about 5 times
Move to the top and below the tube layer

open butterfly2 copy and paste as new layer
resize down by 80% about 4 times
Free rotate to the left by about 20%
Move to the top left  above the ribbon

Open the rose copy and paste as new layer
Resize down by 80% about 3 times
Move to the bottom right above all other layers

Add name copyright and save

Artwork is by Bonnies Creations, Do not use without a proper license to do so.

PTU Scrap Kit Pandora by Naughty Angel Creations

New transparent raster layer 800x800
We can resize later if desired

open frame 2 copy and paste as new layer
Resize down 1 time by 80% and move slightly down off center

open paper 7 copy and paste as new layer
Move below all other layers and erase parts on the ouside of the frame

open the tube copy and paste as new layer
Resize down about 2 times by 80% and place below the frame layer
Duplicate frame and move above the tube and erase parts covering the tube

open the music notes copy and paste as new layer
Move to the bottom above all layers

oepn image 27 copy and paste as new layer
Resize down by 80% about 4 times
Place mid center sitting on the music notes on the right

image 26 copy and paste as new layer
resize down by 80% about 2 times and move to the right below the bird

open image 23 copy and paste as new layer
resize down by 80% about 3 times and move to the right above element26

open element 9 copy and paste as new layer
Resize down by 80% about 2 times
Move element 23 above the tip of element 9

open element 17 copy and paste as new layer
Mirror and move to the left
below the tube layer

Add copyright, name and save