down load Here
Scrap kit by Simply sensation scraps FTU download  here
Tube of choice.  i am uising the work of Keith Garvey. you can purschase his tubes and a liscence to use @ MPT
Open template and delete copyright layer and background layer
Hit Shift D and duplicate the template
close your origional template

open your tube and copy and paste close up layer
place above the center circle
Add an overlay to yuor tube layer and
Erase the part of the tube that is below the circle..

paste your close up layer again
and move aove the bottom rectangle layer
resize your tube layer by 75%
add a luminance and take the opacity to 33%
open your full body tube layer
copy and paste as new layer move to the right side


open your scrap kit 
open glasses element.
Copy and paste as mew layer
resize by 40 and then again by 70 %
Move just above your 2010 line on the bottom and
add your black and while film to the glasses layer
open ballon 4 and resize by 57 % and move below your full body tube layer
add your name copy right and your done.

Open tube copy and paste in the center of your layer
open paper of choice I am using p12
Copy and paste as new layer

Go to layers load and save mask
I am using WSL_Mask226
Merge Group

Open tree4
copy and paste as new layer
move below your tube layer
Move to the right of your tube

Open candle01
copy and paste as new layer
resize by 65%
Move below your tube layer to the left

open present5 copy and paste as new layer
resize by 75 %
Move able your tube layer to the right
duplicate and resize again by 80%
Move the the left of the 1st present

open your deco1
copy and paste as new layer
Move above your mask layer
Duplicate and move the duplicate layer
to the side of the 1st one.

open your word art
copy and paste as new layer
resize by 70%
free rotate by 18% to the left

Add your name and copyright
Save and your done..

Open tube and copy and paste
as new raster layer
place in the center of your layer

open paper of choice
I am using paper 2
copy and paste as new layer

Go to layers
Load/save mask selection
Load mask of choice and merge group.
I am using Mask 226

open your autumn word art 3
copy and paste as new layer
resize by 75%
move below your tube layer and
to the bottom. See mine for placement

open flower 1 copy and paste
as new layer
resize by 30% and place top right
below your tube

open your scarebear 1
copy and paste as new layer
resize by 69%
Move below your autumn word art
and off to the left

open your hearts
copy and paste as new layer
resize by 50 %
Move above your mask layer
Move to the center of your mask layer

Add your copyright and your name
Save and your done.

Open your tube and set aside for right now.

open frame 3 copy n paste as new layer
resize by 50 % place in center
grab your close up if you have one and
copy and paste as new layer
Place below your frame
add a luminance to your close up
Take the opacity down to about 45%

grab you magic wand
click inside your frame layer
Go to selections and invert
Highlight your tube layer and hit delete

open up paper 10
copy and paste as new layer
move below your tube layer
Layers, load and save mask
Merge group

Open up your naughty or nice book
copy and paste as new layer
move above all other layers
resize by 50% then again by 70%

free rotate left by 45 degrees
place at the bottom right of your image

Now open up your tube
Copy and paste as new layer
Move to the right above your book

open up santas sleigh
copy and paste as new layer
resize by 30%
Place bottom left of your frame

open up your stocking Red
copy and paste as new layer
resize by 30%
Move to the top right
below your tube layer

I added a simple Naughty or Nice
With a Gradient glow.
I am using the font CK Kimono for that
as well as the name

Add your name and copyright and your done

Create new Raster layer
650x600

OPen TP_Fr_4 copy and paste
as new layer.resize by 80%

Open your tube. I am using the close up
of this tube right now.
Copy and paste as new layer
resize your close up by 80%
Duplicate your close up
Her face in one side of the frame
top half in the other side of frame

GRab your magic wand, making sure that
your frame layer is highlighted Click
inside the frame and make sure you get
the little areas too. Go to selections
modify and expand by 5
Then go to selections and hit invert
Hightlighting each tube layer
hit delete
add a luminace to both tube layer and
take the opacity to about 50%

Open paper 8 copy and paste as new layer
Move below all your other layer
we just want this under your frame
so erase what is on the out side of
the frame

Open up your tube again
Copy and paste your full length tube
copy and paste as new layer
resize by 80%
Duplicate the frame layer and move above
the tube layer   grab your erase and erase parts
of the frame that covers the tube

Grab the BCA tube that is with the tube
and copy and paste as new layer
Move to the top right

open Tp_EL_2 copy and paste as new layer
resize by 90%
place to where the letters are just below the frame

open TP_EL_47 copy and paste as new layer
resize by 40% Duplicate and free rotate your
duplicated layer to the right by 25%
duplicate your rotated layer and mirror
move over to the other roses
Merge all the roses together

Erase just a piece of each stem
Move below your duplicated frame layer
erasing the parts of the frame that covers
the roses. Duplicate and Mirror
and do the same thing to the other side of the Frame

Add your name, copy right and your done.
dont forget to save

We can resize it later if needed. 

open element 13 Copy and paste as
new layer. resize by 30%. Free rotate
left by 90 degrees.

open element 26 Copy and paste as new
layer. Resize by 50% and then again
by 70%  Free rotate to the right by 90
Move to the center

Open your until we meet again BG
Grab your magic wand and select
inside element13.
Once you have your marching ants
go to selections and modify.
Expand by 5%.

Create a new raster layer
Highlight the new layer
Go back to the BG image copy and
paste into selection

open up your until we meet again tube
copy and paste as new layer
Move to the left of your elements

open element 9 copy and paste as new
layer. Resize by 20%
Place to the bottom right

Open element 10 copy and paste as new
layer resize bt 20%
Place at the bottom right below
element 9. Duplicate element 10 and place
top of the element 10

open element 28 Copy and paste as new layer
resize by 90% Move below your flower elements
Duplicate and Mirror Move below tube layer
Do the same with Elements 9 and 10
Move them below your tube layer

open element 11
copy and paste as new layer
move below element 28 duplicate and Mirrio
Move below element 28

Grab your eraser tool and erase the parts of the
beads that is above the bottom layer

Add your name and copyright.
and dont forget to save
You are done. 

open your window frame
copy and paste as new layer
resizing by 50%

Open your haunted house of choice
Copy and paste as new layer
resize by 75 % Move below yuor frame

Highlight your frame layer once again
resize up to your liking

Open up a paper of chocie i am
using paper 6
copy and paste as new layer
Load and save mask. I am using WSL Mask 223
Merge group and move back up to your frame layer
Grab your eraser and erase the inside part of your frame
You will end up with just the out side of the frame

Open up your tube
Copy and paste as new layer
move to the far right of your frame
and Mirror image

open up A pumpkin of choice
I am using Jack3
Copy and paste as new later
resize by 20%
Move below your tube layer
Duplicte, place both at the 2 bottom corners
of your frame layer

open your bear of choice
I am using bear trick or treater 1
Copy and post as new layer
resize by 40 %
Move to the right above the pumpkin

Add your copyright and name and
save.  Send me your results I would

Create new raster layer 650x650
We can resize later if needed

open frame 3 copy and paste
as new layer

Open a poser or tube of choice
I am using 2 posers that I have created
Copy and paste as new layer
place below your frame
Grab your magic wand
click inside the frame
go to selections and invert
highlight your poser layer and hit delete

open paper of choice
I am using paper 15
copy and paste as new layer
move below your poser layer
Grab your magic wand
click inside the frame
go to selections and invert
highlight your paper layer and hit delete

open your butterfly2
copy and paste as new layer
place at the top of the frame
resize to 85%

add your name and copyright
save and your done.
Its a simple and sweet tutorial

We can resize it later

grab your selection tool and draw a rectangle
open a paper of choice, I am using paper3
Copy and paste  as new layer
Invert and highlight your paper and hit delete

Move that to the center

Open blingcorner 1
Copy and paste as new layer
place at the bottom of your paper
Duplicate and mirror
then flip

open the rose
copy and place as new layer
place at the bottom right hand corner

open couple 1 copy and place as new layer
See Mine for placement

open couple 2
copy and paste as new layer
resize up to yuor liking
Move below your bling layers and
erase what is hanging out

take your transparency level down to about 70


open gun3 copy and paste as new layer
resize by 40 %
Free rotate left by 15%

Open gun
copy and paste as new later
resize by 50%
Free rotate right by 15%

Over lap your guns

Open up  your word art and grab
the words of choice, I am using the
complete Gangsta Love word art

resize by 85% Move above all other layers
place it  top right of your image

Add your name, copyright and your done. 
Save and dont forget to send me your results.

we can resize it later
Flood Fill White if you choose too

Open up your tube of choice and
copy and paste as new layer

Open your CP Panel and Grab a color
Create a new raster layer and flood fill
with color of Choice 

I am using #333333

Go to layer Load and Save mask.
You can use any mask you choose.
I am using Mask 405 By VIx.
Merge Mask group

Go back to your tube layer and resize by  90
Mirror and place
Duplicate tube layer,
grab your selection tool and draw a rectangle
Go to Selections invert and highlighting your
duplicated tube layer hit delete
Add a soft Light to that and move below your
mask layer

Open Flower3 copy and paste as new layer
reszie by 50% and duplicate, place along the
bottom of your mask layer

Open your suckers, I am using all 3
Copy and paste the candy 8 as new layer
resize by 20%
Place below your tube layer

Copy and paste the candy 10 as new layer
resize by 20%
Place on top of the other one
free rotate right by 20


Copy and paste the candy 9 as new layer
resize by 20%
Place on top of the other one
free rotate left by 20

Open your cake, copy and paste as new layer
Resize by 40%
Place bottom right of your image

Open candy 1 copy and paste as new layer
resize by 60%
move below your cake layer
Erase what is below the cake
You will have 3 little piece sticking out

Open your bat Copy and paste as new layer
resize by 40% free rotate right by 20
Move below your tube layer

Add your copyright, name and save.
Your done. 

Dont forget to share your results.
You can send them to scrapsbysamantha@gmail.com

Create new Raster layer 600x600
 and flood fill white

grab your rectangle tool and create a rectangle
go to selections, modify and add border
Outside border by 10
Flood Fill your border on your frame with color of choice.
I am using black

Grab your tube copy and paste as new layer
Move above your tube layer and erase the
part of her legs that are below the frame

open paper of choice.
I am using paper 2
Copy and paste as new layer
Move below your frame layer

Go to selections expand by 3
making sure your paper layer is highlighted
Selections invert and  hit delete

open your star
copy and paste as new layer
resize by 70%
move to the top right of your frame

Open your ipod
copy and paste ipod as new layer
resize by 50%
Move to the bottom left

Copy and paste headphones as new layer
resize by 50%
place near your star top right

open your shorts
copy and paste as new layer
resize by 60%
Place bottom right

Open your shirt
copy and paste as new layer
resize by 60%
move blow your shorts

Add your name, copyright and save.
You are done.

Send your results to simplysami2011@gmail.com

Scrap Kit by Bits N Bobs, you can purchase the scrap kit here
Tube by Ismael Rac  Purchase his work and a license to use @ Artistic Minds
Mask 404 By Vixx You can dowload them from here.. Remember if you download anything
from her site leave her lots of love..

600x600 flood fill white

open frame 3 copy and paste as new layer
resize by 80%
open tube of choice copy and paste as new layer
resize by 80%
Move tube behind your frame layer


Open your paper of choice
i am using paper 1
Copy and paste as new layer
Moving below all other layers

Go to Layers load/save mask image
Open your mask of choice and merge group

Open flower 3
copy and paste as new layer
resize by 75%
Move above all layers
Duplicate 4 time and place along the bottom of your frame

open string 4 copy and paste as new layer
Move between your frame and tube layers

Open doodle 4
copy and paste as new layer
resize by 70 %
Duplicate and mirror
Merge down
Add drop shadow of choice

Add your copyright, name and save

open film strip frame3
copy and paste as new layer

resizing by 60 %
Move to the bottom and duplicare 
open tube of choice
copy and paste as new layer
Move duplicated frame above tube layer
and erase the part that covers your tube

open paper 19 copy and paste as new layer
Go to layers, load/save mask
I am using mask 238 by Wees

open up buttom bow 3
copy and paste as new layer
reszing by 50 % then again by 80 %
Move to the bottom of your frame
in the center..

open your skateboard of choice
I am using board1
copy and paste as new layer
resize by 40%
Free rotate right by 49.91%
duplicate and mirror

open butterfly of choice
Copy and paste as new layer
resizing by 20%
Place on your board.
Duplicate and place at the bottom of your frame

Add your name Copyright and your done.
Send your results to scrapsbysamantha@gmail.com

This tutorial was written by me any similarities to this is completely coincidental.
Lets begin

Create new raster layer 600x600
open paper of choice. i am using paper 11
Copy and paste as new layer

go to layers
Load/Save mask of choice.
I am using WSL-mask 94

open tube of choice
Copy and paste as new layer
Resize tube layer by 80%

Open your spooky word art
Copy and paste as new layer
Move to the bottom of your tube
Duplicate tube and grab your eraser tool
Erase the parts of the legs that
are over the word art

Open up your haunted house
Copy and paste as new layer
Move above your mask layer
You will see the ghosts on the side
of your tube

Open your pumpkin. I am using Pumpkin 1
Copy and paste as new layer
resize by 50%
Place to the bottom right
See mine for placement

Open both brooms
copy and paste broom 1
resize by 60%
Free Rotate right by 15%
Move below your pumpkin

Copy and past broom 2
resize by 60%
Free Rotate left by 15%
move below your pumpkin

Add your copy right name and save
Your done.. Send me your results

Please send your results to Samantha

Scrap by Tiny D you can purchase @ scrappinbytiny
Tube by Keith Garvey you can purchase his work and license to use @ MPT
Mask by Weescotslasscreations

Scap Kit Rockin Round the Clock @ Envied & Admired Scraps
Mask of choice, I am using mask 97 By Weescotslasscreations

NO OUTSIDE TUBES USED FOR THIS TUT



This Tutorial was written on 22 September 2009 By Samantha.
All similarities to this is completely coincidental.

Create new raster layer 600x600

open frame of choice
I am using frame 2
Copy and paste as new layer
resizing by 80%

Open a girl and boy of choice
Copy and paste the girl
resize to your liking and move below your frame
Do the same to the boy..

Grab your eraser tool and erase the parts of
the tubes that are showing oout of the frame

open papers of choice
I am using paper 7 and paper 2
Load layer mask
I am using WSL Mask 97
Paper 2 resize up by 115 % and move
below the 1st paper


Open your record
copy and paste as new layer
resize by 20%

Open your jukebox
copy and paste as new layer
resizing by 30%
Move to the bottom left
Move your record to the top
behind ur jukebox
Duplicate record and move down slightly

Open Music notes2 Copy and paste as new layer
resize by 30%
duplicate 2 time and move around

open Clock 2 copy and paste as new layer
Resize by 20%
Move to the top of your image

Add your name and copyright
Save and your done.
I wanted to keep it pretty simple..

New Halloween tut using a FTU kit.

Just a lil Spook FTU kit by ScrapsbyDMG
Tube of choice. I am using Ismael Rac. You can purchase his work here
Mask of choice. I am using Mask 43 by Weescotslass Creations

this tutorial was written 17 September 2009, by me. Any similarities is completely coincidental.



Create new Raster Layer 600x600
Open frame 3 copy and paste as new layer
resize by 80%
Open tube of choice. I am using the work of
Ismael Rac

Copy and paste tube as a new layer
Move below your frame layer
Grab your magic wand
Click inside the frame, go to selections
Invert and highlight your tube layer and delete.

Open your paper of choice
I am using paper 16
Copy and paste as new layer
move below your tube layer

Go to layers, load/save mask of choice
I am using WSL43
Merge group

Copy and paste your tube once agian
Resize by 90%
mirror and move to the left..

highlight your tube that is in the frame
Add the lighten effect on her and take your
transparency to 94%

open spiderweb 1
copy and paste as new layer
Move above your mask layer

Open spider 2
Copy and paste as new layer
resizing by 30% Move to the top right of your frame
duplicate and Mirror

Open your cauldron
Copy and paste as new layer
resizing by 30%
Move to the bottom right of your frame

open your cat, copy and paste as new layer
resizing by 30%
Move below tube layer 2.
duplicate and mirror.
The second cat should be near your cauldron
Move it below your Cauldron

Add word art of choice
Name and copy right
Save and your complete.

Please send me your results I would love to see them
scrapsbysamantha@gmail.com

♥ Thank you Naughty's Creations for my award
make sure to follow the award guidelines:
1.display the award on ur blog
2.Link to the blog u recieved it from
3.Nominate 10 other blogs
4.Leave a message for them on their blog
these r the blog I awarded:

1.Envied & Admired
2.Wacky Scraps
3.Scrappin Krazy Designs
4.Melissaz Creationz
5. Anti-Social Distortions
6. Little Mama Dee's Psp Tuts
7. Kays Tutorials
8.Pink Kitty Scraps
9. Paradise Designs
10.Pimp'd Tutorials

Scrap Kit Beach fun by ZiggyFan
Mask 85 by Weescotslass Creations
Tube of Choice I am using Pinup Toon, please do not use unless you have a proper license to do so. you can purchase his work and a license @ CILM



This tutorial was written by me on 9 September 2009. Any similarities to this is completely coincidental.

Open new raster layer 600x600n
Open tube of choice
copy and paste as new layer

open paper of choice I am using paper 6
Copy and paste as new layer
Go to layers, load and save mask
Merge mask group
Move below your tube

Open both of your surf boards.
Grab one copy and paste as new layer
Move below your tube layer
Free rotate right by 15

copy and paste your second surf board
Move below your tube
Free rotate right by 15
mirror image

Open your sand castle
Copy and paste as new layer
resize to your liking and move below your tube layer
bottom left for placement


Open your sand pale
copy and paste as new layer
resize to your liking
Move to the bottom right

Open your umbrella
Mirror image
resize to your liking and move behind your pail

Open your life ring
copy and paste as new layer
Resize by 50%
Free rotate by 50
Move below both surfboards and behind your tube

add your copy right, name and save
you are complete.
Dont forget to send me your results to scrapsbysamantha@gmail.com

Scrap Kit Halloween by Sarah. You can puchase @ Pimp My tags with Scraps
Tube by Keith Karvery, You can purchase his work @ MPT. Do not use unless you have a proper license to do so.
Maske 362 by Vix, you can download here



Lets get started. This tutorial was written by me on 2September 2009. All similarities to this is completely coincidental..

You will need pspx2 or any earlier version

Create new raster layer 600x600 Flood fill white,
Open your frame of choice. I am using Frame2
Copy and paste as new layer
Grab your magic wand and click inside the frame
Make sure you get all the little circles too
Then go to selections, modify and expand by 6

open your tube of choice. Copy and paste as new layer
I am using the close up layer for this tube.
Go to selections, invert and delete

Now go to your regular tube layer
copy and paste as a new layer
Go to image and mirror, move to the left of the frame

Open a paper of choice. I am using pp7
Copy and paste as new layer
Move below your frame layer
Highlighting your frame layer
Grab your magic wand and click inside the frame
Make sure you get all the little circles too
Then go to selections, modify and expand by 6

highlight your paper layer, go to selections
invert and hit delete.

Now open your spilled beads 1 element
copy and paste new layer
Move below your paper layer resizing by 80%

Open your couldron, copy and paste as new layer
Move above your tube layer and resize by 50%
Move to the bottom right of your frame

open up the cat of choice. I am using cat1
Copy and paste as new layer
resize by 50% and move to where it is sitting on the couldron

Open up the pumpkin sticker of choice
I am using sticker3. Copy and paste as new layer
Resizing by 50%, pace near the bottom of your couldron

Open up your candy corn copy and paste as new layer
resizing by 50% Move to the bottom, place under your tube layer
duplicate and free rotate right by 35%
Duplicate again and free rotate left by 50%
Merge down and duplicate move the duplicated layer
over behind your couldron
Duplicate again, move up to the top of the frame
resize by 70%, move below the hat of your tube

open up a button of choice.
I am using button2, copy and paste as new layer
Resize by 50% move to the top of your frame layer
see mine for placement

Add words of choice
I added Happy Halloween
and used a gradient glow with this color f7a009

Add your copyright, name and save
You are complete..

Scrap kit by Tiny you can purchase it @ Tiny D's Tiny D's Scrappin Designs
Art work of Elias Chatzoudis you can purchase it @ MPT
Mask 364 by VIX



Create new raster layer 600x600

Open your tube copy and paste as new raster layer
Flood Fill White

Go to your magic wand too and go to selections
We are going to create a frame.
Create a new raster layer
You want the shape set to rounded Rectangle
Make a small rounded rectangle
Go to Selections, Modify border and outside by 5
Flood fill the frame border with a color from your tube
Duplicate and move down, Merge both together \

Copy and paste your tubemove below your frame layer
selecting your magic wand again
Click inside both frames and go to selections,
modify and expand by 5 then highlighting your tube layer
Go to selections and invert, hit the delete key

Now open up a paper of choice I am using pp19
Copy and paste as new layer, moving above your
white Background layer
Open mask of choice i am using mask 364 by Vix
Merge mask group

Now open your tube once again
Copy and paste as new layer
Mirror your tube

Here is where we have fun with it

Open your sucker elements
I am using 3, Lolli7,8, and 10
Copy and paste lolli 10 as new layer
resizing by 20% Moving slightly below your tube image
Copy and paste lolli8 as a new layer
resizing by 20%. free rototae right by 20
Copy and paste lolli7 as new layer
resizing by 20% free rotate left by 20

Open 2 candy sticks of choice
Copy and paste as new layer
resizing by 30% free rotate right by 20%
copy and paste as new layer resizing by 30%
free rotate left by 20
moving both to the right below her feet

open up an icecream cone of choice
copy and paste as new layer
resizing to your liking and place in the center
of your suckers below her legs

Open up your sparkles
copy and paste as new layer
resize by 50% and free rotate right by 90

Move below your all other layers right above your frame layer
Duplicate and mirror moving the duplicated layer right above your mask layer
Grab your eraser and erase the part of the duplicated layer of sparkles that covers your 1st tube layer

add words if you choose or leave it alone

Add your copyright, name and save

I would love to see your results :) So send them to
Scrapsbysamantha@gmail.com

Scrap Kit pretty in pink by Ali. You can puchase @ Paradise4Scrappers
Tube by Keith Karvery, You can purchase his work @ MPT. Do not use unless you have a proper license to do so.
Maske 362 by Vix, you can download it here. Please make sure you leave a little love when downloading.



Create new raster layer 600x600 Flood fill white,
Open your frame, i am using frame 1
copy and paste as new layer resizing by 50%

Open your tube, copy and paste as new layer
move below your frame
highlight your frame layer and grab your magic
wand clicking inside your frame
go to selections, modify and expand by 6%

highlight your tube layer
go to selections, invert and hid delete
move to the left and take your settings to luminance

Copy and paste your tube layer again
mirror your tube and move the the right.
Resize your tube by 90% (see mine for placement )
duplicate your frame layer and move above
the complete tube layer

highlight your tube layer, and grab your eraser tool
carefully erase the part of the tube that is below the frame
now hightlight your top frame layer and erase the part
of the frame that is covering your tube


Open the paper of choice I am using paper26
highlight your white back ground layer
copy and paste your paper
Go to layers, New masklayer, from image
find your mask in the box, make sure your
source luminance is checked hit okay..

Merge Mask Group
Now open up the butterfly of choice
I am using butterfly 1 copy and paste as new layer
resizing it by 20% move to the top left of your frame for placement

Open the flowers of your choice
I am using flower 3
copy and paste as new layer
free rotate left by 90% and resize by 30%
Move the the bottom of your frame

Add your copyright, name and save.

I would love to see your results please send them to
scrapsbysamantha@gmail.com

New tutorial Whispers of the Wind.
I am using the beautiful ScrapKit by Ziggyfan - Something Special
Tube is by Jennifer Janesko Do not use unless you have the proper permissions to do so. You can obtain a licesnce to use her work here CILM



This tutorial was written by me on 2September2009. All similarities to this is completely coincidental.

Lets begin :)

You need pspx2 or any earlier version
Open New Raster Layer 600x600
Flood fill White
Open your frame, copy and paste as new layer
Open your tube and copy and paste as new layer
Move under your frame and resize your tube layer by 89%

Duplicate your frame layer and move above your tube layer
Grab your eraser tool and carefully erase the frame over
the hair and arm. Becareful not to erase to much of the frame

Now open up your paper of choice
I am using paper 3
Copy and paste as new layer moving just above your
white back ground layer

Highlighting your intact frame
Grab your magic wand and click inside the frame
Go to selections, Modify, and expand by 6%
Highlighting your paper. Go to selections, invert and hit delete

Open your bows. I am using the purplish one.
Copy and paste as new layer
Moving above all other layers
Resing by 50% free rotate left by 40%

Open your buttons. cut out one and copy and paste as new
layer. Resizing by 50% and free rotate left by 25%
and Move above your bow and to the center..


Grab a font of choice. I am using
Good vibrations

Type out " WHISPERS OF THE WIND IS EVERY DREAM OF THE SOUL."
add a gradient glow of choice

add your copyright, name and save
your done..

Send your results to scrapsbysamantha@gmail.com

A beautiful scrapkit was used for this tut
Love Story by Naughty Creations. You can find her here
Tube of choice. I am using the artwork of Irene Shpak.Do not use unless you have a proper license to do so. You can purchase her work here
Mask of choice. I am using a mask by Weescotslass Creations



This tutorial was written on 31August2009 by Samantha. All similarities to this tutorial is completely coincidental.

Create new Raster Layer 600x600
Flood fill white

Copy and paste frame 4 as a new layer
Open tube copy and paste as new layer
Moving below your frame layer
Mirror and resize by 70%
Grab your magic wand, Highlight your frame layer
Clicking inside the frame, selections modify
expand by 10%, highligh your tube layer
Selections, invert and hit delete
change the settings on your tube layer to luminance legacy

Open your paper of choice, I am using pp2
Copy and paste as new layer Moving it below your tube layer
Go to layers load/save mask I am using Mask 238
Merge mask group and resize by 80%, Free rotate left by 90 degrees

Open paper of choice, I am using pp11
Copy and paste as new layer, moving below your tube layer
Grab your and click inside the frame. Make sure you have all
the little areas of the frame selected
Selections, Modify, Feather by 5%
Then Selections, Modify, expand by 10%

Highlight your paper layer,Selections, invert and hit delete.

Now its time for your elements
Open your bowlocknkey copy and paste as new layer
Move above your frame layer resizing by 50%
Move to the top left corner of your frame

Open Flowers3 copy and paste as new layer
resizing by 61% move to the bottom right of your frame
See mine for placement.

Open your candle, copy and paste as new layer
resizing by 40% Move to the bottom left of your frame
Open flower5 copy and paste as new layer
resizing by 20% move above your candle layer
with your eraser tool carefully erase the part
that is below the candle

Open up the word art of choice, I am using wordart 5
copy and paste as new layer moving to the top of your frame
and slightly to the right, resizing by 80% and adding
a drop shadow of choice

Add your copyright, name and save and you are done.
I would love to see what you come up with.
Please send to scrapsbysamantha@blogspot.com

Scrapkit is Zirconia by Tammykat @ Pimp My Tags W/ Scraps
You can check out Their Blog Here
Artwork is by Elias Chatzoudis. Do not use unless you have a proper license to do so.
You can purchase his tubes here
Mask of choice. i am using Mask 81 by Weescotlass Creations



This tutorial was written by me Samantha using Corel Paintshop Pro X2 on
31 August 2009. All similarities to this is completely coincidental.

Create new raster layer 600x600
Flood fill white

open frame of choice
I am using acrylicframe2
copy and paste as new layer
resize by 80% and center

copy and paste tube of choice as new layer
mirror and resize up by 115%
Move to the right of the frame and below the frame

go to selections, Modify and expand by 10
highlight your tube layer
selections invert and hit delete


Take the settings on your tube to luminance legacy
opacity down to 69%

Now open up the paper of choice
I am using solidblack paper
Copy and paste as new layer, move below your tube layer

highlight your frame layer
grab your magic wand and click inside the frame
Go to selections, modify expand by 10
highlight your paper layer, selections invert and hit delete

Copy and paste your tube layer once again
Moving above your frame layer to the left

Open up another paper
I am using purple solid paper
copy and paste as new layer
Moving above your white background

Open up your mask of choice I am using Mask 88
Go to layers, New Mask layer, from Image
Merge group

Now to your elements
Open up purpleblue flower copy and paste as new layer
Resize by 65%
Duplicate, Mirror and flip
Move below your tube layer

Open up your bluegemstar
copy and paste as new layer
Moving right above your mask group

Add your copyright, name, save and your done
I would love to see your results. You can send them to me at
scrapsbysamantha@gmail.com

Scrap Kit is by Ziggy, you can find the kit here
Tubes are the art work of Keith Garvery. Do not use without a proper license. You can purchase his tubes and a license here
Mask 81 is by Weescotslass Creations.



This tut was written on 30 August 2009. This is an original tutorial by Samantha.
All others completely a coincidence.

LETS BEGIN
PSP X2

Create new raster layer 600x600
Flood fill white

Open your frame
copy and paste as new layer

Open up tube of choice
Copy and paste as new layer
move below your frame
I have her behind the left frame

grab your magic wand
Click inside the left frame ( you need to see marching ants)
Selections Modify expand by 10
Invert, highlight your tube layer and hit delete

Open up tube of choice
Copy and paste as new layer
move below your frame
I have her behind the right frame

grab your magic wand
Click inside the right frame ( you need to see marching ants)
Selections Modify expand by 10
Invert, highlight your tube layer and hit delete

Make both the tubes on the left and right
Luminance Legacy

Now open up a third tube
copy and paste as new layer
Move it above your frame layer

Highlight your white background layer
Now open up the paper of choice
I am using paper 1

Copy and paste as new layer
Go to layer, Load/save mask invert transparency unchecked
I am using Mask 81 by Weescotslass Designs

Now open another paper of choice.
I am using paper 4
Copy and paste as new layer
Make sure it is above your mask layer
highlight your frame layer and grab your magic wand
Click inside the left frame holding your shift down
click inside the right frame
Go to selections Modify and expand by 10
highlight paper 4
go to selections invert and delete

Open up element of choice
I am using the Flower
Copy and paste as new layer
Move t the very top
resize by 50%
Move below your final tube layer
Duplicate and mirror
Move down to the bottom of your frame
See mine for placement of both

Open up your beads
copy and paste as new layer
Move to the bottom of your frame
resize to your liking and move below your last tube layer

Add your copyright, name and save
You are done.

Don't forget to share your results.
Send to scrapsbysamantha@gmail.com

Scrap Kit Love Bites By Addictive pleasures
Twilight image of choice
Fonts of Choice
Word art of Choice



Create New Raster Layer 600x600 You can resize it later
Flood Fill White

Open frame 3 copy and paste as new layer
Resizing by 50%

Grab your magic wand and select inside the frame
Create new raster layer
Go to selections modify expand by 10%

Make sure your new layer is highlighted
Copy and paste image of choice into selection
Move below your frame layer

Open up your curtain bling
Copy and paste as new layer
Resize by 55%
Move above your frame

Open your blood element
Copy and paste as new layer
Resize by 110%
Moving below your image layer

Open up feathers 3
Copy and paste as new layer
Make sure it is above your blood splat layer

Open up chess1 copy and paste as new layer
Resizing by 30%
Move above to the top
Place bottom left of the frame

Open Chess2 copy and paste as new layer
Resizing by 40% Free Rotate Right by 90%
See mine for placement

Open Leaves copy and paste as new layer
Resizing by 60%
Move to the right below your image layer

Open Rose2 Copy and paste as new layer
Resizing by 50% move to the right of your frame
Move this above all other layers

Open Rose3 Copy and paste as new layer
Resizing by 50% move to the right near your white rose
Free Rotate to the Right by 10%
Move Below your white Rose

Open Rose 4 copy and paste as new layer
Resize by 50% move to the right near the right rose
Free Rotate left by 10%
Move below your white rose
See Mine for placement of the roses

Open your candle copy and paste as new layer
Resizing by 40% move above the rose
See mine for placement

Open up Bow3 copy and paste as new layer
Resizing by 30%
Move to the center of your candle

I have wrote Eternal Love
Used the Good Vibrations Font
Eye Candy 4000
Gradient Glow
Color Red ( Glow Width 3 pixels, Soft Corners 20%, Overall Opacity 60%)

Move that to the top of your frame
(see mine for placement )

Add your name, Copyright and save
you are done

A new tut Featuring the work of Elias Chatzoudis
and a fabulous kit by Bits N Bobs



This tut was written by Me on 22August2009
Any resemblance to any other tutorial is strictly coincidental.

Lets Begin

Supplies Needed
PSPx2 ( any version will work)
Scrap of Choice I am using Water-Melon by Bits N Bobs You can Purchase her scraps here
Tube of Choice I am using the artwork of Elias Chatzoudis. You can Purchase here. Do Not use if you do not have a proper License to do so.
Mask of choice.. I am using WSL_Mask226 by Weescotslass
Font of choice I am using Arctic



Open new layer 700x700 (rename Background)
We will resize this later
Flood Fill white

Open up Frame-11 from your kit
Copy and paste as new layer
Duplicate frame we will use it alittle later

Open your tube and copy as a new layer
Paste on your frame move under the duplicated frame
Grab your eraser tool and erase the top parts of the duplicated frame
We want her arms and head over the frame

Now open up your paper of choice
I am using paper-8
Copy and paste as new layer
Move it right above your background layer

Highlight your bottom frame and grab your magic wand
Click inside the frame, when you see your marching ants
Go to Selections modify and expand by 8

Hightlight your paper layer
Go to Selection and invert and hit the delete key

open some leaves I am using ivy 3
Copy and paste as new layer
Move above your background layer
See mine for placement

Open up flowers-10
copy and paste as new layer
Move above all other layer and place to the right of your frame
See mine for placement

Open up paper-3
with your background layer highlighted
Copy and paste paper as a new later
Open up your mask
SOuce Lumiance check and invert transperacy uncheck
Apply Mask and merge group

add drop shadow of choice to mask layer

Go to image
Resize ( make sure resize all layers is checked)
Resize by 80%

i have decided to drop the white background.
you can leave it if you wish

Add copyright information
Name and Save..

Don't forget to send me your results I would love to see them:)