This one is a simple but very cute Tutorial. It came out wonderful

written on 8.30.12 by Guilty Pleasures *Sami* using my own mine and creativity

any similarities are completely coincidental. 

PTU Kit is Roses are Red by Sleek N Sassy Designz.

You can purchase this kit at Scrappin Dollars
No outside Tubes used for this Tutorial 
Poser included with kit  ( Poser is from MediEvilCreations)


New Raster layer 600x600

Open element  22 copy and paste as new layer
Resize down 1 time by 80% and place in the center

Open Poser  - roseprincess7
copy and paste as new layer
resize down about 2 times
place in the center with the bottom of the skirt covering the bottom roses

open element30 copy and paste as new layer
Resize down by 80% about 5 times
Move below the tube layer Place mid center left

open element 6 copy and paste as new layer
resize down by 80% about 6 times
Move to the bottom right above poser layer

open element 20 copy and paste as new layer
Resize down by 80% about 5 times
Move to the bottom left below poser layer

open element 9 copy and paste as new layer
resize down by 80% about 3 times
Free rotate to the right by 45

open element 12 copy and paste as new layer
Resize down by 80% about 3 times
Move above all other layers  above the tube layer

Open paper 1 copy and paste as new layer
Move below all other layer
Grab your eraser  make a circle around the inside of Main element
Then erase all other parts of the paper

add your name copyright and save

PTU Scrapkit  is 50 Shades of Grey  by A Taggers Scrap

You can purchase this kit at any one of her stores
Artwork is by Keith Garvey, You can purchase here

New transparent raster layer 650x650

Open frame 1 copy and paste as new layer
Place in the center
Open paper 18 copy and paste as new layer
Resize down 1 time by 80%  Move below frame layer
erase all parts of the paper on the outside of the frame layer

Open your closeup tube copy and paste as new layer
Move below the Frame layer
Erase parts on the outside of the frame
Add a luminace to this

Highlight your frame layer 
Open your tube and copy & paste in your full length layer
Mirror and move to the left

Open the sparkles, copy and paste as new layer
Resize down 1 time by 80 % and move
Move below the full length tube layer
Move as desired and erase parts on the outside of the frame

Open the scatteredleaves copy and paste as new layer
Resize down about 2 times by 80% move below full length tube layer

open bow 3 copy and paste as new layer
resize down 1 time about 80%
Mirror and move below tube layer to the left
Erase the part of the bow that is below the foot

Open the mask copy and paste as new layer
resize down about 1 time by 80%
free rotate to the right  about 45 % and place below the foot
See mine for exact placement

open the tags copy and paste as new layer
resize down by 80% about 2 times
Place to the left below tube layer
Place to where the slave tag  is shown like mine
Erase the Chain at the top and the side like mine

open the toychest copy and paste as new layer
resize down 1 time by 80% move to the right below tube layer

open cuffs2 copy and paste as new layer
Resize down by 80% about 1 time move to the top right above all other layers

open the tickler copy and paste as new layer
resize down 2 times by 80% Move to where the top is in the
middle of the cuffs

Open the shoes copy and paste as new layer
Resize down about 2 times by 80%
Move to the bottom right
Above the toychest and make sure they are covering the bottom of the tickler

Open tickler2 copy and paste as new layer
resize down 1 time by 80% and free rotate to the right by 45%
Move above the shoes

Open the flogger copy and paste as new layer
resize down by 80% and move below the shoes

Add your name copyright and save

PTU Scrapkit Vegas Showgirl is By Rissa's  Designs

You can purchase this kit at Scrappin Dollars
Tube is by Jessica Dougherty  You can purchase at CDO     

New Transparent Raster Layer 650x650
We can crop out anything un-needed and extra

open RD43 copy and paste as new layer
Resize down 1 time by 80% and place in the center

open paper 8 copy and paste as new layer
resize down 1 time by 80% move below frame layer
Erase all parts on the outside of the frame

open your tube copy and paste as new layer
Place near the bottom of the frame
Duplicate frame layer and move above the tube layer
Erase all parts of the frame covering the tube

Open RD28 copy and paste as new layer
Move to the Mid center of the layer
Directly above the paper layer
Erase all parts on the outside of the frame layer

Open RD11 copy and paste as new layer
Resize down 1 time by 80%
Move directly Below RD28
Make to where it looks like the tube is laying on it like the floor.
Erase all excess on the outside of the frame

Open Rd16 copy and paste as new layer
move below all other layers

Open RD20 copy and paste as new layer
Resize down by 80% about 2 times
Move below the tube layer

Open RD05 copy and paste as new layer
Resize down by 80% about 4 times
Move above all other layers To the top of the pole.

Open RD36 copy and paste as new layer
Resize down about 5 time by 80% and move below the tube layer 
Erase any extra parts of the frame that is over the car

add your name copyright and save

   

*Written on 8.29.12 by Guilty Pleasures *Sami*

Using my own mind and creativity. Any similarities is completely coicidental! 

Scrap Kit by Alika Scraps - Dark Beauty  purchase at O Scrap Candy Shack
Tube is By Barbara Jensen 

New transparent raster layer 650x650

Open as89 copy and paste as new layer
resize down by 80% about 3 times,  Place in the center

open tube layer copy and paste as new layer
Move below the frame layer
Erase all parts on the outside of the frame
add a luminance to your tube layer

open paper 16 copy and paste as new layer
move below all other layers
Erase all parts on the outside of the frame

Open the tube again copy and paste as new layer
Move above all other layers
Mirror tube layer and move to the left
Duplicate frame layer and move duplicated layer above tube
Erase all parts covering the tube

Open As80 copy and paste as new layer
resize down by 80% about 1 times and move to the bottom mid center
above all other layers

open as33 copy and paste as new layer
resize down about 2 times by 80%
free rotate to the left by 90% and move to the right
below all other layers
Duplicate and Mirror
you will have one on both sides

open as46 copy and paste as new layer
Move above all other layers and to the bottom right
Resize down by 80% about 3 times.
depends on the size you want it

open as77 copy and paste as new layer
resize down by 80% about 4 times and move below as46
Move slightly to the right a bit more of the star

open as59 copy and paste as new layer
Move below the to tube layer to the top  of the frame
covering the opening

Add your name copyright and save

**Written by Guilty Pleasures *Sami* on 8.28.12, using my own creativity 

Tube is by Jose Cano you can purchase at Scraps and the City
Kit is Queen of Hearts by Lizquis Scraps, you can purchase at SATC
New Transparent  Raster Layer 600x600
open frame 3 copy and paste as new layer
Resize down 2 times by 80%
Move mid center bottom

Open paper 4 copy and paste as new layer
Move below all other layers
erase what is on the outside of the frame

open your tube copy and paste as new layer
resize down 1 time by 80% and move above the frame layer
Duplicate frame layer
Highlight the tube and erase all parts on the outside of the frame ( Bottom)
Highlight the frame and erase all parts covering the tube

open Ribbon3 copy and paste as new layer
Move above all other layers and to the bottom right

open the swirlies copy and paste as new layerrrrrrrrr
Move by tube layer
Now erase the part of the frame that is covering the swirlie
Only up to the ribbon 

open sparkles 1 copy and paste as new layer
Move to the bottom below ribbon layer
Erase all parts to the right of the Frame

open mushrooms2 copy and paste as new layer
Move to the left below the ribbon layer
Mirror and move back to the left

Open mushroom1 copy and paste as new layer
Move to the left above Musrooms 2 and place to where the stem
is below the ribbon
Erase the parts of the stem on the outside of the ribbon

open letters copy and paste as new layer
Move to the right directly above the swirlies layer

open the rabbit copy and paste as new layer
resize down 3 times by 80% and mirror
Move above all other layers and to the left of Mushrooms 1

add your name copyright and save

Kit is Tattoos and Lace by Killer Kitty Killer Kreations

You can purchase at The Scrappers Den
Tube is by Barbara Jensen

New Raster Layer 600x600
open frame 4 copy and paste as new layer
resize down by 80% 1 time
Move to the bottom center

Open tube layer and copy and paste as new layers
Move below frame layer and place as desired
Duplicate and move to the left, place as desired.
Erase all parts of both on the outside of the frame layer

Open paper 5 copy and paste as new layer
Move below all other layers
Erase all parts on the outside of the frame layer

Go back to the Tube layers
Add a Luminance legacy to the bottom tube layer
Take the transparentcy down to 46%

Highlight the top tube layer
Add a Porcelin with the following settings
 now add a luminace legacy

Open tube again copy and paste as new layer
Resize down 1 time by 80% move above all other layers
Duplicate frame layer and move above the tube
Erase the parts of her legs on the outside of the frame
now highlight the duplicated frame layer and erase parts covering the tube

open spiralstars 1 copy and paste as new layer
Move below all other layers in the center

open wings copy and paste as new layer
Move above all other layers in the center
resize down 1 time by 80% in the center

open silverdoodle 1 copy and paste as new layer
resize down by 80% about 2 times
Move to the bottom of the frame below the wings

open kitty1 copy and paste as new layer
Resize down about 4 times by 80%
Move above all other layers to the right

open cupcake 3 copy and paste as new layer
resize down by 80% about 6 times
move to the right below the kitty

open the lipstick copy and paste as new layer
resize down about 6 times by 80%
Move to the right below the cupcake layer

add name copyright and save

Written on 8.24.12 by Guilty Pleasures aka Sami. Any similarities to this is completely coincidental. 

Was created using my own mind and creativity!

 Kit by Abstract Creations - Feel the Beat. 

You can purchase this kit at O Scrap Candy Shack 

Tube is by  VeryMany . You can purchase at Pics for Design


New transparent raster layer 600x600

Open ele24 copy and paste as new layer
resize down 2 times by 80% and place in the center

open paper1 copy and paste as new layer
Resize down about 3 times
Move below element24

Grab your magic wand
Highlight  ele24 click inside the circle
Go to selections, Invert, Highlight paper layer and hit Delete

Open the Tube layer copy and paste full legnth tube layer
Resize down 1 time about 80%
Erase all parts of the tube that is on the outside of tube
that is on the outside of element24 at the bottom.

Now Duplicate ele24 and move above the tube layer
Erase all parts covering the tube layer

Open ele26 copy and paste as new layer
resize down by 80% about 3 times and  Move directly above the paper layer
erase all parts  on the outside of ele24

open ele28 copy and paste as new layer
resize down 1 time by 80%
Move above all other layers and to the bottom

open ele7 copy and paste as new layer
resize down by 80% about 2 times and move below ele28
Near the bottom of the tube layer

open ele17 copy and paste as new layer
Resize down by 80% about 5 times
Move Directly above element 7 to the left
Duplicate and move to the right

open ele30 copy and paste as new layer
Resize down by 80% about 3 times and move to the right below the
star  I have mine to where it looks like it is behind the star element

open element 9 copy and paste as new layer
resize down by 80% about 4 times and duplicate
Move one to the top right, the other bottom  center left

open ele37 copy and paste as new layer
Move below element 17
resize down by 80% about 4 times and move to where it is on the top of the piano

open element 12 copy and paste as new layer
resize down by 80% about 4 times
Move below the left element 17  and to the left

add name copyright and save

This tutorial was written on 8.13.12 by Sami using my own my and creativity 

any similarities is completely coincidental! 

Scrap kit is a beautiful PTU kit Kitties Sinful Designz 

You can purchase this beautiful kit at The Scrappers Den 

Artwork is from Jennifer Janesko

You can purchase her artwork at CDO Store  

New transparent  Raster layer 600x600
open frame 6 copy and paste as new layer
Place in the bottom  center of the layer

open paper 10 copy and paste as new layer
Resize down by 80% 2 times
Move below the frame layer
erase all parts on the outside of the frame

Open tube layer copy and paste as new layer
place as desired below the frame layer and erase all parts on
the out side of the frame
add a luminance legacy

copy and paste the tube layer again
Place to where her legs are at the bottom of the frame
Duplicate frame and move above the tube
Erase all parts of the frame covering the tube

Open ribbon1 copy and paste as new layer
Resize 1 time by 80% and move above all other layers
to the bottom
Repeat with the Ribboned Lock

open glittersplay2 copy and paste as new layer
Move below all other layers in the center

Open diamond rain copy and paste as new layer
Move below the full length tube layer
Below the top frame layer
Erase all parts on the outside of the frame

open flower 1 copy and paste as new layer
resize down by 80%  about 7 times
Move to the right above all other layers

Add name copyright and save

a very simple tutorial. 

Scrap is a PTU kit by TLP Designz 

You can purchase at Confetti Scraps 

Tube is by Alexander McMillan, You can purchase at SATC

written on 8.12.12 by Guilty Pleasures aka Sami. Using my own mind and creativity 

any similarities are completely coincidental 

New raster layer600x600
open tlp_cmTs_tag06 copy and paste as new layer
Place in the center

Open full length tube copy and paste as new layer
Resize down about 2 times by 80% move to the left

open tlp_cmTS_ribbon08  copy and paste as new layer
resize down by 80% about 3 times place in the center
below the tube layer

open tlp_cmTS_flower02 copy and paste as new layer
resize down by 80% about 4 times  place to the bottom right
below the tube layer

open tag 2 copy and paste as new layer
resize down by 80% about 5 time
Mirror and move to the left below the ribbon layer

Add name copy right and save

Scrap Kit is a FTU Forum Exclusive by Misty Lynn Creations. 

You can find this kit and more at PSP Crazies

Tube is by Elias Chatzoudis, Purchased from his New Store 

Do not use with out a proper license number 

written on 8.10.12 by Sami - Using my own mind and creativity 

any similarities is completely coincidental. 

  

New Raster Layer 600x600

open frame1 copy and paste as new layer
Resize by 80 % as desired
Place in the center

open paper 3 copy and paste as new layer
Resize down 1 time by 80%
Move below frame layer
Erase all parts on the outside of the frame

add a porcelain with the following settings and a luminance legacy

Open tube layer copy and paste as new layer
Move below frame layer and place as desired.
Erase all parts on the outside of the frame

open the boots copy and paste as new layer
move above all other layers
Resize down by 80% about 3 times
Move to the right of the frame layer

Open the tube again
copy and paste as new layer
Resize down about 1 time
Move below the frame layer
place as desired
Duplicate frame layer and move above all other layers
Erase all parts except the bottom that is covering the tube and boots

open icecream1 copy and paste as new layer
resize down by 80% about 3 times  and Move above all other layers to the left

open nailpolish copy and paste as new layer
resize down by 80% about 5 times
Place above all other layers on the right of the nail polish

open sparkles copy and paste as new layer
resize down 1 time by 80%
Move directly above the tube layer and
erase all parts on the outside of the frame and covering the boots

open lips 2 copy and paste as new layer
resize down about 6 times by 80%
Move above all other layers to the left above the icecream and nail polish

open glitter3 cop and paste as new layer
Resize 1 time by 80% and move below all other layers

open the cell phone copy and paste as new layer
resize down by 80% about 5 times
free rotate to the right by 25% and move below the icecream layer

open ribbon2 copy and paste as new layer
resize down by 80% about 2 times and move below all element layers

add name copyright and save 

 

 Tube is by Zlata M, Purchase at Pics for Design

Scrap is a PTU  Toxic Kitty by Alika Scraps Exclusively to Scraps With Attitude 

Written on August 9, 2012 by Guilty Pleasures aka Sami 

Using my imagination and creativity. 

New raster layer 600x600

Open as48 copy and paste as new layer
resize down by 85% 2 times

open paper as7 copy and paste as new layer
Resize down 1 time by 85%
Erase all parts of the paper on the outside of the frame

Open tube layer copy and paste as new layer
resize down 2 times by 85% and move below the frame layer 
Place where you want it in the top frame
erase all other parts
add a luminance legacy

Open tube again and copy and paste as new layer
Resize down by 85% about 4 times
Place to the right
place the heel of the right shoe on the edge of the lower frame

open as49 copy and paste as new layer
Resize down 1 times by 85%
Move below all other layers to the top

open as53 copy and paste as new layer
resize down 1 time by 85%  move below the tube layer
Place the bow on the element in the center of the top frame

open as26 copy and paste as new layer
resize down by 85% about 3 times
Move above the tube layer to the left

open as23 copy and paste as new layer
resize down 5 times by 85% 
move to the right above all other layers
near the loop on the ribbon

open as23 copy and paste as new layer
move below the frame layer placing in the center

Add name copyright and save 

*If you try my tutorial please email me the results to sami.guiltypleasures@gmail.com
I will post results to my blog* 

Jenny over at Jenny's Design's tried 2 of my tutorials.. 

Fairy Love you can find here. 

Here are Jenny's Results 

She also worked with Sweet for Denim

Kit is BDB Vishous  by A Taggers Scrap -  Purchase at Scraps and the City  
Tube is by Darkmoon's Dream Designs -  You can purchase at Scraps and the City

New Raster layer 660x660
open frame 3 copy and paste as new layer
resize down by 80% about 1 time
Place about 5 inches from the bottom of the layer

open paper 10 copy and paste as new layer
Resize down 1 time by 8% and move below all other layers
Erase all parts on the outside of the frame layer

Open tube layer 4 copy and paste as new layer
Resize down by 80% 4 times
Move below the frame layer in the 1st block of the frame
erase all parts on the outside of the frame
Duplicate and mirror the tube layer
Merge and add a luminance Legacy

Open tube layer 2 copy and paste as new layer
Resize down about 4 times by 80%
Place above all other layers
To the bottom of the Frame layer
see mine for exact placement.

Open paper ribbon5 copy and paste as new layer
Resize down by 80% about 2 times
Place below the tube layer

open the fairydust copy and paste as new layer
resize down by 80%
Move below the tube layer
Erase all parts that is on the outside of the frame layer

Open mistress boots copy and paste as new layer
Resize down by 80% about 3 times
Mirror and move to the right below the tube layer

Open flower2 copy and paste as new layer
Resize down by 80% 7 times
Move to the bottom left below the tube layer

open the crystal ball copy and paste as new layer
place below the paper ribbon
In the center of the frame layer

open the candle copy and paste as new layer
resize down by 80% about 3 times
Move to the left below the flower layer

open whip2 copy and paste as new layer
resize down by 80% about 4 times
Move to the right directly above the boots...

open the cross copy and paste as new layer
resize down 3 times by 80% and move to the left
below the flower layer

Add name copyright and save

Kit by Darlin Creations  Blue Love

You can purchase this wonderful Kit at The Scrappers Den
tube Keith Garvey  Purchased at PTE, Keith is in the process of 

going independent. A  link will be provided soon

New raster layer 600x600
element  32 copy and paste as new layer
Resize down by 80% about 2 times
Place in the center

element 55 copy and paste as new layer
Resize as desired Move below all other elements

paper 11 copy and paste as new layer
Move below all other layers
erase all parts on the outside of element 32

open the tube
grab the close up copy and paste as new layer
Move below element 32
Erase all parts on the outside of element 32
Add a luminance legacy
duplicate and mirror

Open full length tube layer
copy and paste as new layer
place center but off set to the left just a little

open element 12 copy and paste as new layer
Move below all other layers
resize down by 80% about 4 times

element 51 copy and paste as new layer
Resize down about 4 times
Move below full length tube layer

open element 54 copy and paste as new layer
resize down by 80% about  6 times
Move below the full length tube layer and to the bottom.
See mine for exact placement!

open element 56 copy and paste as new layer
resize down by 80% about 7 times
Move below full length tube layer and to the right

open element 20 copy and paste as new layer
resize down by 80 % about 4 times
Mirror and move to the left behind the tube and up some
See mine for placement

open element 25 copy and paste as new layer
resize down by 80% about 2 times
Move below the tube layer and to the left
Move down just a bit and to the left

Open element 41 copy and paste as new layer
resize down by 80% about 5 times and move below the shoe and mid right
see mine for exact placement.

add your name, copyright and save